New Products
9661
클램프 온 센서
500A Voltage Output Sensor for Current Load Measurements
Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9661 is a 500A AC voltage output clamp sensor for measuring large load current.
| 모델 | 설명 | Quote |
| 9661 |  |
Note : Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
주요 특징
- 인버터 장치 또는 상업용 파워 라인용
- 최대 550A AC 연속적 측정
■ 기본 사양
| CLAMP ON SENSOR 9661 | |
| 정격1차전류 | AC 500 A |
| 최대 허용 입력(45~66Hz) | 550 A 연속 |
| 출력 전압 | AC 1mV/A |
| 진폭정확도(45~66Hz) | ±0.3 % rdg. ±0.01 % f.s. |
| 위상정확도(45~5kHz) | ±0.5° |
| 주파수특성(진폭) | 40Hz~5kHz 에서 ±1.0 %
(진폭 정확도로부터의 편차) |
| 대지간최대정격전압 | AC 600 Vrms 이하 |
| 측정가능도체경 | φ46 mm 이하 |
| 전원 | 불필요 |
| 치수 및 질량 | 78W x 152H x 42Dmm, 380g 코드길이 : 3m, 출력단자:BNC 단자 |
■ Use with these products
MEMORY HiCORDER MR8847
• Max. 16ch Analog + 16ch Logic • Max. 10ch Analog + 64ch Logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution
Learn more ▶
POWER QUALITY ANALYZER PW3198
• Class A PQA • Monitor and record power quality • 1P2W to 3P4W + additional input (AC/DC 1ch) • Clamp input
Learn more ▶
CLAMP ON POWER HiTESTER 3169
• For 50/60 Hz commercial power lines • 1P2W to 3P4W • Save demand values to the PC card continuously • Clamp input • D/A output
Learn more ▶
Tel : +82-70-7872-0701Fax : +82-2-2167-3801
2F, ACE hightech city, 775, Gyeongin-ro, Yeongdeungpo-gu, Seoul, Korea
2F, ACE hightech city, 775, Gyeongin-ro, Yeongdeungpo-gu, Seoul, Korea