New Products
)
)
)
)
사용자의 목적에 따라 구성이 가능한 ZVAX-TRM 확장 유닛은 ZVA/ZVT 네트워크 분석기와 함께 사용되어 활성 DUT에 대한 까다로운 측정을 위한 신호 컨디셔닝을 제공합니다. (ZVAX-TRM24/40/50/67은 모든 ZVA8/24/40/50/67 또는 ZVT8/20 네트워크 분석기와 결합할 수 있으며 확장 장치는 해당 ZVA24/40 용 RF 상호 연결 케이블/50/67 모델). 예를 들어, 펄스신호 또는 송신/수신 모듈에서 잡음지수를 측정할 수 있습니다. ZVAX 네트워크 분석기와 함께 ZVAX-TRM은 최대 24/40/50/67 GHz (67 GHz 모델의 일부 옵션에 대한 제한 사항)의 어플리케이션을 위해 사용자 목적에 맞춘 테스트 세트를 구성할 수 있습니다.
주요특징
- T/R 모듈, 수신기, 송수신기 및 전력 증폭기에서의 측정을 위한 ZVA/ZVT 네트워크 분석기용 확장 장치
- 기본 장치는 최대 +43 dBm의 전력 지원
- 펄스 변조, 증폭, 고전력, 잡음 지수 및 잡음에 대한 선택
- 상호 변조 측정
- ZVAX-TRM은 24, 40, 50, 67 GHz까지 모델링
- 사용자가 필요로 하는 응용 프로그램을 위한 유연한 구성
- 측정 구성을 위한 전진 대화 상자
- USB 인터페이스를 통한 ZVAX-TRM의 자동 탐지 및 제어
R&S ZVAX-TRM 확장 유닛 스펙
| Key specifications | ||
| Maximum input power at test port | base unit | |
| Rise time | R&S®ZVAXxxB712/B73 pulse modulator options | <5 ns, typ. 1ns |
| On/off ratio at 10 GHz | R&S®ZVAXxxB712/B73 pulse modulator options | >60 dB |
| Pulse droop | R&S®ZVAXxxB712/B73 pulse modulator options | typ. 0.05 dB |
| Trigger delay | R&S®ZVAXxxB712/B73 pulse modulator options | <25 ns |
| Output power (with all options installed, |
R&S®ZVAXxxB112/B134 output amplifier options | > 5 dBm (higher output power with less options installed or higher input power) |
| Dynamic range with all options installed | up to 24 GHz | >120 dB |
| Dynamic range with all options installed | up to 40 GHz | >110 dB |
| Dynamic range with all options installed | up to 50 GHz | >100 dB |
| Dynamic range with all options installed | up to 67 GHz | >90 dB |
1) Higher powers can be provided and handled by using external components, e.g. preamplifier, attenuator, etc.
R&S ZVAX-TRM 확장 유닛 옵션정보
| 옵션 모델 | 설명 | |
| Options | ZVAX24B31 | Low-noise pre-amplifier for ZVAX-TRM24 10 MHz to 24 GHz, measurement path port 1 |
| ZVAX24B32 | Low-noise pre-amplifier for ZVAX-TRM24 10 MHz to 24 GHz, measurement path port 2 |
|
| ZVAX24B712 | Pulse modulators for ZVAX‑TRM24 10 MHz to 24 GHz, to generate pulsed signals at ZVAX‑TRM24 port 1 and port 2 |
|
| ZVAX24B73 | Pulse modulator for ZVAX‑TRM24 10 MHz to 24 GHz, to generate pulsed signals at network analyzer port 3 or at ZVAX‑TRM24 port 1 (B213 option active) |
|
| ZVAX24B112 | Output amplifiers for ZVAX‑TRM24 10 MHz to 24 GHz, for increased output power at ZVAX‑TRM24 port 1 and port 2 |
|
| ZVAX24B134 | Output amplifiers for ZVAX‑TRM24 10 MHz to 24 GHz, for increased output power at network analyzer port 3 and port 4 or at ZVAX‑TRM24 port 1 and port 2 (B213/B224 option active) |
|
| ZVAX24B213 | Combiner for ZVAX‑TRM24 10 MHz to 24 GHz, to generate two-tone signal at ZVAX‑TRM port 1 (SRC 1 + 3) |
|
| ZVAX24B224 | Combiner for ZVAX‑TRM24 10 MHz to 24 GHz, to generate two-tone signal at ZVAX‑TRM port 2 (SRC 2 + 4) |
|
| ZVAX40B31 | Low-noise pre-amplifier for ZVAX-TRM40 10 MHz to 40 GHz, measurement path port 1 |
|
| ZVAX40B32 | Low-noise pre-amplifier for ZVAX-TRM40 10 MHz to 40 GHz, measurement path port 2 |
|
| ZVAX40B712 | Pulse modulators for ZVAX‑TRM40 10 MHz to 40 GHz, to generate pulsed signals at ZVAX‑TRM40 port 1 and port 2 |
|
| ZVAX40B73 | Pulse modulator for ZVAX‑TRM40 10 MHz to 40 GHz, to generate pulsed signals at network analyzer port 3 or at ZVAX‑TRM40 port 1 (B213 option active) |
|
| ZVAX40B112 | Output amplifiers for ZVAX‑TRM40 10 MHz to 40 GHz, for increased output powerat ZVAX‑TRM40 port 1 and port 2 |
|
| ZVAX40B134 | Output amplifiers for ZVAX‑TRM40 10 MHz to 40 GHz, for increased output power at network analyzer port 3 and port 4 or at ZVAX‑TRM40 port 1 and port 2 (B213/B224 option active) |
|
| ZVAX40B213 | Combiner for ZVAX‑TRM40 1 MHz to 40 GHz, to generate two-tone signal at ZVAX‑TRM port 1 (SRC 1 + 3) |
|
| ZVAX40B224 | Combiner for ZVAX‑TRM40 10 MHz to 40 GHz, to generate two-tone signal at ZVAX‑TRM port 2 (SRC 2 + 4) |
|
| ZVAX50B31 | Low-noise pre-amplifier for ZVAX-TRM50 10 MHz to 50 GHz, measurement path port 1 |
|
| ZVAX40B73 | Pulse modulator for ZVAX‑TRM40 10 MHz to 40 GHz, to generate pulsed signals at network analyzer port 3 or at ZVAX‑TRM40 port 1 (B213 option active) |
|
| ZVAX40B112 | Output amplifiers for ZVAX‑TRM40 10 MHz to 40 GHz, for increased output powerat ZVAX‑TRM40 port 1 and port 2 |
|
| ZVAX40B134 | Output amplifiers for ZVAX‑TRM40 10 MHz to 40 GHz, for increased output power at network analyzer port 3 and port 4 or at ZVAX‑TRM40 port 1 and port 2 (B213/B224 option active) |
|
| ZVAX40B213 | Combiner for ZVAX‑TRM40 1 MHz to 40 GHz, to generate two-tone signal at ZVAX‑TRM port 1 (SRC 1 + 3) |
|
| ZVAX40B224 | Combiner for ZVAX‑TRM40 10 MHz to 40 GHz, to generate two-tone signal at ZVAX‑TRM port 2 (SRC 2 + 4) |
|
| ZVAX50B31 | Low-noise pre-amplifier for ZVAX-TRM50 10 MHz to 50 GHz, measurement path port 1 |
|
| ZVAX67B712 | Pulse modulators for ZVAX-TRM67 10 MHz to 67 GHz, to generate pulsed signals at ZVAX-TRM67 Port 1 and Port 2 (decreased performance f>60 GHz) |
|
| ZVAX67B73 | Pulse modulators for ZVAX-TRM67 10 MHz to 67 GHz, to generate pulsed 7 signals at VNA Port 3 or R&S®ZVAX-TRM67 Port 1 (Opt. B213) (decreased performance f>60 GHz) |
|
| ZVAX67B112 | Output amplifiers for ZVAX‑TRM67 10 MHz to 67 GHz, for increased output power at ZVAX‑TRM67 port 1 and port 2 |
|
| ZVAX67B134 | Output amplifiers for ZVAX‑TRM67 10 MHz to 67 GHz, for increased output power at network analyzer port 3 and port 4 or at ZVAX‑TRM port 1 and port 2 (B213/B224 option activ) |
|
| ZVAX67B213 | Combiner for ZVAX‑TRM67 10 MHz to 67 GHz, to generate two-tone signal at ZVAX‑TRM67 port 1 (SRC 1 + 3) |
|
| ZVAX67B224 | Combiner for ZVAX‑TRM67 10 MHz to 67 GHz, to generate two-tone signal at ZVAX‑TRM67 port 2 (SRC 2 + 4) |
문서 자료
| 제목 | 다운받기 |
|---|---|
| R&S ®ZVAX-TRM Extension Unit - 데이터 시트 | 다운로드 |
| R&S ®ZVAX‑TRM Extension Unit - 제품 브로슈어 | 다운로드 |
| R&S ®ZVA Vector Network Analyzer - 제품 브로슈어 | 다운로드 |
ZVAX-TRM 확장 유닛 - 비디오
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)