New Products
)
)
)
Up to three channels in a single instrument
The R&S®HMP DC Power supplies are primarily designed for industrial use. With two or three output channels and up to 10 A output current, these rugged instruments are ideal for a wide variety of applications. They offer high efficiency with low residual ripple and many protection functions.
모델
| 모델명 | 출력 채널 수 | 최대 출력 파워 | 채널 당 출력 전압 | 채널 당 출력 전류 |
| R&S®HMP2020 | 2 | 188 W | 0 V to 32 V | channel 1: 10 A, channel 2: 5 A |
| R&S®HMP2030 | 3 | 188 W | 0 V to 32 V | 5 A |
주요특징
- 2 or 3 channels with max. 188 W total output power
- Maximum output voltage of 32V per channel
- Maximum output power per channel: 80 W; except R&S®HMP2020 (CH1: 160W)
- Maximum output current per channel: 5 A; except R&S®HMP2020 (CH1: 10 A)
- Electronic fuse (OCP), adjustable maximum voltage (OVP), overtemperature protection (OTP)
More than meets your daily needs
- All channels galvanically isolated and floating
- All channels have the same voltage range
- All channels have overload and short-circuit protection
- Parallel and serial operation
- Constant voltage and constant current modes
- Tracking and link functions
- Protection functions to safeguard instrument and DUT
- Modern instrument concept: small, compact and quiet
Easy operation
- Intuitive to use
- Color coding of operating states
- EasyArb function for all channels
- Save and recall instrument settings
Ideal for labs and test systems
- Tailored for use in labs and system racks
- Sense function for more stringent accuracy requirements
- Connections on front and rear panels
- Remote control of instrument functions
주요 스펙
| Electrical specifications | ||
| Number of output channels | 2/3 | |
| Total output power | max. 188 W | |
| Maximum output power per channel | 80 W; except R&S®HMP2020, CH1: 160 W | |
| Output voltage per channel | 0 V to 32 V | |
| Maximum output current per channel | 5 A; except R&S®HMP2020, CH1: 10 A | |
| Voltage ripple and noise (20 Hz to 20 MHz) | < 1.5 mV (RMS) (meas.) | |
| Current ripple and noise (20 Hz to 20 MHz) | < 1 mA (RMS) (meas.) | |
| Load recovery time*1) | < 1 ms (meas.) | |
| Programming/readback resolution | Voltage | 1 mV |
| Current | < 1 A: 0.1 mA (10 A CH: 0.2 mA); ≥ 1 A: 1 mA | |
| Readback accuracy (± (% of output + offset)) | Voltage | < 0.05% + 5 mV |
| Current | < 0.1% + 2 mA | |
| Special functions | ||
| Measurement functions | voltage, current | |
| Protection functions | OVP, OCP, OTP | |
| FuseLink function | ● | |
| Fuse delay at power-up | ● | |
| Sense function | ● | |
| Sink mode | – | |
| Output sequencing | – | |
| Trigger input/output | – | |
| Arbitrary function | ● (EasyArb) | |
| Analog/modulation interface | – | |
| Data logging | – | |
| Display and interfaces | ||
| Display | 240 × 64 pixel LCD | |
| Rear panel connections | connector block with 4 lines per channel | |
| Remote control interfaces | standard: USB, LAN; optional: IEEE-488 (GPIB), RS-232 | |
| General data | ||
| Dimensions (W × H × D) | 285 × 93 × 405 mm | |
| Weight | 7.8 kg/8.0 kg | |
| Rack installation | R&S®HZ42 option | |
| *1) 10% to 90% load change within a band of ± 20 mV of set voltage. | ||
문서 자료
| 제목 | 다운받기 |
|---|---|
| R&S ®HMP2000 파워서플라이 시리즈 - 제품 브로셔 | 다운로드 |
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)