MP500 TCL3 NFC 디바이스용 고성능 및 초고성능 테스터

Characterization of contactless smart cards, readers, and NFC devices are the main uses of the MP500 TCL3. It combines advanced signal generation features to an unmatched flexibility and possibilities of evolution. The MP500 TCL3 main features are :

주요 특징 :

Generation of terminal and smart card waveshapes, according to the following specifications : ISO 14443 A/B, ISO 15693, FeliCaTM, MifareTM, NFC Forum tags (1,2,3,4,5)
Support of VHBR exchanges (Very High Bit Rates) in both ASK and PSK mode
Ideal tool to test active load modulation components
Internal spy feature embedded (spy between the tester and the Device Under Test)
Possibility to adjust all specifications defined physical parameters (field strength, carrier frequency, rise/fall time, ...)
Presence of an arbitrary signal generator, in order to define advanced perturbations
Integrated measurement of resonance frequency / Q factor like a VNA (definition of the power generated by the tool to perform the measurement)
Measurement of complex impedances (resistance / capacitance / inductance)
Solutions to test compliance with ISO 10373-6, ISO 10373-7, NFC-IP1, NFC-IP2, NFC Forum, EMVCo, ICAO standards
Evolutivity to Wireless Charging testing (Wireless Power Consortium)
Open platform : use the MPManager software, or our Dll driver to program your own test sequences

데이터시트 다운로드

기술 자료

지원되는 프로토콜
ISO/IEC 14443 (proximity)
– Supported data rates : 106, 212, 424, 848 kbps
– VHBR (ASK & PSK)
– Asymetrical baudrates supported

B' (Innovatron)

ISO/IEC 15693 (Vicinity)
– Supported data rates : high & low, 1 out of 4, 1 out of 256)
– Tag behaviour 1 and 2 sub carriers answers supported

ISO 18000-3 모드 1
Mifare^TM
– Supported versions : Classic, Light, Ultra Light, UItra Light C, Desfire

FeliCa^TM
– Supported data rates : 212, 424 kbps

NFC 포럼 모드
– Peer 2 peer, Listening, Polling

NFC 포럼 태그
– Tag type 1 (Innovision Topaz)
– Tag type 2 (MifareTM Ultra Light)
– Tag type 3 (FeliCaTM)
– Tag type 4 (ISO 14443 A/B)

ISO 18092 (NFC-IP1)
– Supports Active/Passive mode, Initiator/Target

Raw 모드
– Possibility to implement custom protocols

프로그래밍 가능한 파라미터
Physical parameters (all types)
– Field strength
– Rise/tall time of the modulation
– Modulation index
– Pause time (ISO 14443 A & ISO 15693)
– Duration of each bit + EOF + SOF (ISO 14443 A)
– Arbitrary waveshape generator : definition of slopes, noises, addition and multiplication with alternative signals

Logical parameters
– Type A pause
– FWT, TR0, TR1, TR2
– Communication speed
– Response time (contactless smart card simulation)

스파이(SPY) 기능
Signals displayed
- 신호 파형 (클럭(clock) 사이클당 최대10포인트)
- 필드
- 변조(Modulation)
- 시퀀스, 바이트
- I/O 방향
- 전송속도 변경
- 트리거 상태

사용 가능 테스트
전기 테스트
공진 주파수 / Q 인자 (11MHz ~ 22 MHz) @ 선택 가능한 전계 강도
- 복합 임피던스(저항, 인덕턴스, 커패시턴스)
- Rp//Cp 계산
- 자기장 측정
- EMD(Electro magnetic disturbance)

로직 테스트
- 수많은 타이밍 컨트롤 제어 사전 구현 시퀀스
- Anti-tearing 테스트
- 프레이밍(패리티 오류, CRC 오류, 프로토콜 오류, 타이밍
(너무 짧음, 너무 오래))

치수
- W x D X H : 166 x 280 x 58 mm
- 무게 : 1.80 kg

사용 분야

The MP500 TCL3은 일반적으로 다음과 같은 분야에서 사용됩니다 :