Logger Script 메모리 하이로거 LR8513 - Hioki ::NUBICOM::
top
New Products
Home » 제품 » 데이터 로거 » 블루투스 무선 로거

LR8513 메모리 하이로거

메모리 하이로거 LR8513
  • 개요
  • 주요특징
  • 사양
  • 옵션
  • 문서자료

로드 전류와 리크 전류를 클램프 센서로 쉽게 측정

히오키 메모리 하이로거는 멀티 채널의 전압, 온도, 저항 그리고 습도 신호를 기록하는 고속의 데이터 로거로써, 채널과 강한 소음 저항 간을 완벽히 격리시키는 기능이 있습니다.

Hioki LR8513은 무선 통신 기술을 사용하여 측정된 데이터를 히오키 LR8410 무선 로깅 스테이션 또는 안드로이드 태블릿으로 블루투스로 전송하는 2 채널의 AC/DC 전류 입력 모듈입니다.

모델 설명 Quote
LR8513 2 채널, 센서는 별도 판매

Note : The LR8512/8513 alone is not capable of making measurements. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

주요특징

  • Measure AC and DC load current and AC leak current
  • Choose from eight current sensors
  • Place inside a distribution panel, close the cover, and monitor measured values from the outside
  • Measure power easily—just set the voltage and power factor
  • Compact, two-channel model fits where other devices don't
  • Measurement data is sent to the Hioki LR8410-20 using Bluetooth® wireless technology
  • Measurement data is saved even when communications are interrupted
  • Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply)
  • Instrument can store 500,000 data points per channel

기본 사양

Operation Measurement data is sent wirelessly to the LR8410-20, which is required in order to collect data. Up to seven units can be controlled. Operates over a line-of-sight distance of up to 30 m (98.43 ft)
Measurement parameters [Number of channels] 2ch (common GND)
[Measurement modes] AC load current, DC load current, AC leak current (using current sensor)
[Measurement ranges] 500.0 mA AC to 2000 A AC, 10.00 A DC to 2000 A DC (By current sensor)
*Current and leak current that occur intermittently cannot be measured.
Measurement accuracy ±0.5% rdg.±5 dgt. (DC, AC 50/60 Hz)
* Add the sensor's accuracy when the current sensor is connected
Recording [Interval] 0.5 to 30 sec, 1 to 60 min, 14 selections, [Mode] Instantaneous value, average valu
Power supply AC Adapter Z2003 (100 to 240 V AC, 50/60 Hz), or LR6 (AA) alkaline battery ×2, or External power: 5 to 13.5 V DC
Continuous use About 10 days reading instantaneous values using AA alkaline batteries (with an interval of 1 s and Bluetooth® on)
Dimensions and mass 85 mm (3.35 in) W × 75 mm (2.95 in) H × 38 mm (1.50 in) D, 130 g (4.6 oz) (excluding the battery)
Accessories CD-R (Instruction manual, Logger utility software) ×1, Measurement guide ×1, Caution paper (using radio wave) ×1, LR6 (AA) Alkaline battery ×2, Connection cable L1010 ×2

■ Current sensors (AC load)

CONNECTION CABLE
9219

CONNECTION CABLE 9219
Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length

CLAMP ON SENSOR
CT6500

CLAMP ON SENSOR CT6500
• 40 Hz to 1 kHz bandwidth • Primary: 500 A AC • Secondary: 1mV AC/A • Max. input of 600 A AC • φ46 mm (1.81 in) dia.

Learn more ▶

CLAMP ON SENSOR
9669

CLAMP ON SENSOR 9669
• 40Hz to 5kHz • Phase: 45Hz to 5kHz • 1000A AC rated input • 0.5mV AC/A output • φ55mm (2.17in) dia.

Learn more ▶

CLAMP ON SENSOR
9695-02

CLAMP ON SENSOR 9695-02
• 40 Hz to 5 kHz • Phase: 45 Hz to 5 kHz • 50A AC rated input • 10mV AC /A output • φ15mm (0.59in) dia.

Learn more ▶

■ Current sensors (AC leak)

CLAMP ON LEAK SENSOR
9675

CLAMP ON LEAK SENSOR 9675
• 40 Hz to 5 kHz • Rated 10 A AC • 100 mV AC/A output • φ30 mm (1.18 in) dia.

Learn more ▶

CLAMP ON LEAK SENSOR
9657-10

CLAMP ON LEAK SENSOR 9657-10
• 40 Hz to 5 kHz • Rated 10 A AC • 100 mV AC/A output • φ40 mm (1.57 in) dia.

Learn more ▶

■ Current sensors (AC/DC load)

CLAMP ON AC/DC SENSOR
CT9693

CLAMP ON AC/DC SENSOR CT9693
• DC to 15 kHz (-3dB) • 2000 A AC/DC rated input • 200 mV/f.s. output via the CT6590 • φ55mm (2.17in) dia.

Learn more ▶

CLAMP ON AC/DC SENSOR
CT9692

CLAMP ON AC/DC SENSOR CT9692
• DC to 20 kHz (-3dB) • 200 A AC/DC rated input • 200 mV/f.s. output via the CT6590 • φ33mm (1.30in) dia.

Learn more ▶

CLAMP ON AC/DC SENSOR
CT9691

CLAMP ON AC/DC SENSOR CT9691
• DC to 10 kHz (-3dB) • 100 A AC/DC rated input • 200 mV/f.s. output via the CT6590 • φ35mm (1.30in) dia.

Learn more ▶

■ Other options

MAGNETIC STRAP
Z5004

MAGNETIC STRAP Z5004

AC ADAPTER
Z2003

AC ADAPTER Z2003
100 V to 240 VAC
  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)