Logger Script AC/DC 커런트 센서 CT6862
top
New Products
Home » 제품 » 전류 프로브 (클램프센서) » 광대역전력계, 전류입력용(파형관측용으로도 사용가능)

CT6862 AC/DC 커런트 센서

AC/DC CURRENT SENSOR CT6862
AC/DC CURRENT SENSOR CT6862
  • 개요
  • 주요특징
  • 사양
  • 옵션
  • 문서자료

Delivering Wide-bandwidth and High-precision Current Measurement

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6862 is a DC to 1MHz/50A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.

모델 설명 Quote
CT6862 50 A AC/DC Cart
CT6862-05 50 A AC/DC, 12 pin terminal, for the PW6001 only Cart

주요특징

  • 진폭 정확도 ±0.06%, 위상 정확도 ±0.2°의 고성능을 실현
  • 광대역DC ~1MHz(CT 6862)의 양호한 주파수 특성
  • EV, HEV 등 전기 자동차의 전류 계측에 최적합
  • 광범위한 온도 범위에서 사용가능하여 자동차 계측에 적합
  • 태양광 발전ㆍ연료전지 평가 등 배터리의 충방전에서 부터 인버터 2차측까지
  • 오실로코프/메모리 하이코더 등으로 파형 모니터가 가능 (9555-10과 병용)

기본 사양

AC/DC CURRENT SENSOR CT6862
Rated current 50 A AC/DC
Max. allowable input 100 A continuous (requires derating at frequency or temperature)
Frequency characteristics Amplitude: DC to 1 MHz
Phase: DC to 300 kHz
Amplitude and Phase accuracy DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°)
Defined to 1 MHz
Power consumption 5 VA max. (at 50 A/55 Hz, ±12 V power requirement)
Output voltage 2 V/rated current range (voltage output with the Sensor Unit 9555-10, use with a device having a 1 MΩ input resistance or higher)
Max. rated voltage to earth AC/DC 1000 V (50/60 Hz, CAT III )
Core diameter φ 24 mm (0.94 in)
Operating temperature, humidity -30°C to +85°C (-22°F to 185°F), 80% rh or less (with no condensation)
Power supply DC ±11 V to ±15 V (Power suppled via the 9555-10, which supports 100 to 240 V AC)
Dimensions and mass 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, cord length: 3 m (9.84 ft), 340 g (12.0 oz)
Accessories Instruction manual ×1, Mark bands ×6

■ Options

CONNECTION CORD L9217

CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, for signal output, 1.6 m (5.25 ft) length

CONNECTION CORD 9165

CONNECTION CORD 9165
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length, not CE marked

CONVERSION CABLE 9318

CONVERSION CABLE 9318
To connect the CT6841/43, CT6865/63, 9277/78/79, 9270/71/72 to the 8971/40/51, 38 cm (14.96 in) length

SENSOR UNIT
9555-10

SENSOR UNIT 9555-10
Power supply for current sensors when used alone

Learn more ▶

CONVERSION CABLE CT9900

CONVERSION CABLE CT9900
For current sensor connector 10pin - 12pin

■ Combination use

POWER HiTESTER
3193-10

POWER HiTESTER 3193-10
• Wide-band DC, 0.5Hz to 1MHz • DC, or 1P2W to 3P4W • 6ch-Direct or Clamp input

Learn more ▶

POWER ANALYZER
3390

POWER ANALYZER 3390
• Wide-band DC, 0.5Hz to 150 kHz • DC, or 1P2W to 3P4W • 4 ch/ Clamp input • Measure inverter equipment and analyze motors

Learn more ▶

MEMORY HiCORDER MR8847

MEMORY HiCORDER MR8847
• Max. 16ch Analog + 16ch Logic • Max. 10ch Analog + 64ch Logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution

Learn more ▶

POWER ANALYZER PW6001

POWER ANALYZER PW6001
• ±0.02% accuracy • Wide-band DC, 0.1 Hz to 2 MHz • DC, or 1P2W to 3P4W • 6 ch/ Clamp input • Max. 12ch by synchronizing two 6-channel models • Measure inverter equipment and analyze motors • Analyze waveforms without an oscilloscope • Ideal for measuring Silicon Carbide (SiC) inverters that demand high precision

Learn more ▶

Literature

제목 다운받기
CT6862 데이터시트 다운로드
  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)