Logger Script AC/DC 커런트 프로브 CT6843
top
New Products
Home » 제품 » 전류 프로브 (클램프센서) » 광대역전력계, 전류입력용(파형관측용으로도 사용가능)

CT6843 AC/DC 커런트 프로브

AC/DC CURRENT PROBE CT6843
AC/DC CURRENT PROBE CT6843
  • 개요
  • 주요특징
  • 사양
  • 옵션
  • 문서자료

Consistent, High-precision Current Testing Across a Wide Temperature Range

Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6843 is DC to 500 kHz/200 A sensors, ideal for capturing signals during the efficiency testing of batteries, inverters and power conditioners.

모델 설명 Quote
CT6843 200 A AC/DC Cart
CT6841-05 20 A AC/DC, 12 pin terminal, for the PW6001 only Cart

Note : These products cannot be used alone. The optional 9555-10 is required in order to supply power and connect the clamp to a Memory HiCorder or other instrument. Products can be directly connected to the Power Meter 3193-10 and Power Analyzer 3390 (Does not support Model 3390-10).

주요특징

  • 40˚C to 85˚C 까지의 넓은 사용온도 범위로 환경시험에 활약
  • 진폭 정화도 ±0.3%, 위상 정확도 ±0.1°의 고정확도 클램프식 프로브
  • DC ~ 1MkHz(CT6841), DC ~ 500kHz (CT6843) 의 넓은 주파수대역
  • 한 손으로 개폐조작이 가능한 소형 사이즈, 진동에 강한 로킹 메커니즘
  • 도체위치의 여향, 근접 도체의 영향, 자계의 영향을 기존제품에 비해 대폭 줄임
  • 자동차의 배터리 충반전 효율 측정, 인버터 변환 효율 평가 등

기본 사양

AC/DC CURRENT PROBE CT6843
Rated current 200 A AC/DC
Max. allowable input 400 A continuous (requires derating at frequency or temperature)
Frequency characteristics Amplitude: DC to 500 kHz
Phase: DC to 300 kHz
Amplitude and phase accuracy DC ±0.3 % rdg. ±0.02 % f.s. (Phase: Not defined)
DC< f ≤ 100 Hz ±0.3 % rdg. ±0.01 % f.s. (Phase: ±0.1 deg)
Defined to 500 kHz
Power consumption 6 VA max. (at 200 A/55 Hz, ±12 V power requirement)
Output voltage 0.1 V/A (CT6841), 0.01 V/A (CT6843) (voltage output with the Sensor Unit 9555-10, use with a device having a 1 MΩ input resistance or higher)
Core diameter φ 20 mm (0.79 in)
Operating temperature, humidity -40 °C to +85 °C (-40 °F to 185 °F), 80% rh or less (with no condensation)
Power supply DC ±11 V to ±15 V (Power suppled via the 9555-10, which supports 100 to 240 V AC)
Dimensions and mass 153 mm (6.02 in)W × 67 mm (2.64 in)H × 25 mm (0.98 in)D, cord length: 3 m (9.84 ft), 370 g (13.1 oz)
Accessories Instruction manual ×1, Mark bands ×6, Carrying Case

■ Options

CONNECTION CORD L9217

CONNECTION CORD L9217
Cord has insulated BNC connectors at both ends, for signal output, 1.6 m (5.25 ft) length

CONNECTION CORD 9165

CONNECTION CORD 9165
Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length, not CE marked

CONVERSION CABLE 9318

CONVERSION CABLE 9318
To connect the CT6841/43, CT6865/63, 9277/78/79, 9270/71/72 to the 8971/40/51, 38 cm (14.96 in) length

SENSOR UNIT
9555-10

SENSOR UNIT 9555-10
Power supply for current sensors when used alone

Learn more ▶

CONVERSION CABLE CT9900

CONVERSION CABLE CT9900
For current sensor connector 10pin - 12pin

■ Compatible products

POWER HiTESTER
3193-10

POWER HiTESTER 3193-10
• Wide-band DC, 0.5Hz to 1MHz • DC, or 1P2W to 3P4W • 6ch-Direct or Clamp input

Learn more ▶

POWER ANALYZER
3390

POWER ANALYZER 3390
• Wide-band DC, 0.5Hz to 150 kHz • DC, or 1P2W to 3P4W • 4 ch/ Clamp input • Measure inverter equipment and analyze motors

Learn more ▶

MEMORY HiCORDER MR8847

MEMORY HiCORDER MR8847
• Max. 16ch Analog + 16ch Logic • Max. 10ch Analog + 64ch Logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution

Learn more ▶

POWER ANALYZER PW6001

POWER ANALYZER PW6001
• ±0.02% accuracy • Wide-band DC, 0.1 Hz to 2 MHz • DC, or 1P2W to 3P4W • 6 ch/ Clamp input • Max. 12ch by synchronizing two 6-channel models • Measure inverter equipment and analyze motors • Analyze waveforms without an oscilloscope • Ideal for measuring Silicon Carbide (SiC) inverters that demand high precision

Learn more ▶

Literature

제목 다운받기
CT6843 데이터시트 다운로드
  • 가족친화우수기업
  • 청년친화 강소시업
사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)