로직 프로브 MR9320-01

Detect the presence of voltage or relay contact signals with Memory HiCorders

The 9320-01 and 9320 are 4-channel logic probe used to detect voltage or relay contact signals with Hioki Memory HiCorders.

모델	설명	Quote
9320-01	For the Memory HiCorder, miniature terminal type

Note : Caution for terminal size connectiong to a Memory HiCorder

주요 특징

4 channels input (Not isolated)
For voltage/contact signal ON/OFF detection
3 steps selectable of input threshold
Response pulse width 500 ns or more
Connection with a Memory HiCorder, miniature terminal type the 9320-01, large terminal type the 9320

■ 기본 사양

LOGIC PROBE 9320-01
Function	Detection of voltage signal or relay contact signal for High/Low state recording
Input	4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance: 1 MΩ (with digital input, 0 to +5 V) 500 kΩ or more (with digital input, +5 to +50V) Pull-up resistance: 2 kΩ (contact input: internally pulled up to +5 V)
Digital input threshold	1.4V/ 2.5V/ 4.0V
Contact input detection resistance	1.4 V : 1.5 kΩ or higher (open) and 500 Ω or lower (short) 2.5 V : 3.5 kΩ or higher (open) and 1.5 kΩ or lower (short) 4.0 V : 25 kΩ or higher (open) and 8 kΩ or lower (short)
Response pulse width	500 ns or more
Max. allowable input	0 to +50V DC (the maximum voltage that can be applied across input pins without damage)
Dimensions and mass	62 mm (2.44 in)W × 94 mm (3.70 in)H × 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft)
Accessories	IC clip leads ×1, Alligator clip leads ×1, Carrying case ×1, Instruction Manual ×1

사업자등록번호 : 220-86-72761대표이사 : 신동만대표전화 : 070-7872-0701팩스 : 02-2167-3801
(우)07299 서울특별시 영등포구 경인로 775 (문래동 3가, 에이스하이테크시티 3동 2층)