3284

클램프 온 AC/DC 하이테스터

20A/200A AC/DC Clamp Meters with Analog Output and Peak Hold for Inrush Measurement Applications

Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The 3284 is an AC/DC current and voltage clamp meter with analog output capabilities and a peak hold function.

모델	설명	Quote
3284	with monitor/analog output

주요 특징

Analog output for current measuring level, current measuring waveform, or frequency measuring level.
Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts
AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms

■ 기본 사양

CLAMP ON AC/DC HiTESTER 3284
DC current	20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.
AC current	20.00/ 200.0 A, (10 Hz to 2 kHz, True RMS), Basic accuracy : ±1.3 % rdg. ±3 dgt.
DC voltage	30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC voltage	30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (10 to 1 kHz, True RMS)
Crest factor	2.5 or less (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog output	DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)
Resistance, Continuity check	N/A
Frequency	1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.
Other functions	AC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
Display	Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)
Power supply	6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02/-03
Core jaw dia.	φ 33 mm (1.30 in)
Dimensions and mass	62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)
Accessories	Test Lead L9207-10 ×1, Carrying Case 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1